Harken 7807 2-Point Lift - 60 lb Manuale Utente Scaricare il pdf

3-Easy

Steps

3 Store

2 Lift

Includes

all mounting

hardware

1 Secure

Plan Location of 2-Point Lift System

Read instructions before starting. Plan ceiling location of mounting

board. Position welded screw eye (E) at top of adjoining wall.

Distance from organizer (B) on end of board to welded screw

eye must be equal or greater than lifting distance. See Fig. 2

and “Install Welded Screw Eye” instructions next page.

Mount Board to Ceiling

Draw a centerline the length of a 6' (1.83 m) 2" x 6" pine mounting

board. Use a stud finder to locate ceiling trusses/rafters on which

to mount system (follow manufacturer’s instructions). Drill four

(three minimum)

" (8 mm) evenly-spaced clearance holes on

board centerline matching truss/rafter locations. Use holes in

mounting board as template to mark ceiling. Drill truss/rafters

using a

" (5.5 mm) drill bit. Install board using

" x 4" (8 x

100 mm) lag bolts (K) with flat washers (L). Do not over-tighten.

Printed in USA 4977 04/15

Harken, Inc. • 1251 E. Wisconsin Ave. • Pewaukee, WI 53072 USA • Tel: 262-691-3320 • Fax: 262-691-3008 • Email: hoister@hoister.com • Web: www.hoister.com

Maximize garage

space by storing

items up and out of the

way. This block-and-tackle system

allows one person to easily raise and

lower items with a single rope. A self-

locking pulley grips instantly even if

the rope is accidentally released.

Tools/supplies needed (purchase separately): Electric/hand drill; drill bits:

" (2.5 mm),

" (6 mm); Stud finder;

stepladder; safety glasses, tape measure; one (1) 2" x 6" x 6' (50 mm x 152 mm x 1.83 m) grade 2 or better pine board.

#7807 maximum load:

60 lb (27 kg)

SAVE TIME! READ THE ENTIRE MANUAL BEFORE BEGINNING HOISTER INSTALLATION.

IMPORTANT SAFETY INFORMATION

• DO NOT UNTIE ANY ROPES

System comes ready to install. Leave F, G, and H together.

• DO NOT RAISE OR LOWER HOISTER

with anyone standing under object.

• SECURELY ANCHOR

each

fastener to a truss/rafter.

EASY TO USE

EASY TO INSTALL

COMPLETE KIT

SELF-LOCKING

STORE AT CEILING LEVEL

One person can easily raise and lower

with a single control rope.

Three styles store

everything from

canoes, kayaks,

and SUPs to bikes,

ladders and roof

racks.

(45, 60, 90, 145, 200 lb)

WE STORE IT ALL!

ONE-PERSON OPERATION

Raises and lowers easily

with a single control rope.

EASY TO INSTALL

Kit comes complete.

SAFE, SELF-LOCKING

Safety cleat grips instantly if

rope is accidentally released.

LIFTS EVENLY

From 10 to 200 lb.

Web: www.hoister.com

MAXIMIZE GARAGE SPACE

WARNING: Do not screw into laminated rafters.

They are not intended to accept fasteners.

Consult rafter maker for recommendations.

Screwing into laminated rafters can weaken

system, causing load to fall which can cause

an accident.

WARNING: Do not over-tighten pigtail lag screws

past top thread. This can weaken fastener hold

which can weaken system, causing load to fall

which can cause an accident.

225A

Max Max Lifting weight

Part

No. Description

Mechanical

advantage

ceiling height item width Min Max

ft m ft m lb kg lb kg

7800 1-Point storage system bike/utility lift 2:1 10 3.05 — — 10 4.5 45 20

7801 4-Point storage system 3:1 10 3.05 5 1.52 15 7 60 27

7802 4-Point storage system 4:1 10 3.05 5 1.52 25 11 90 41

7803 4-Point storage system 6:1 10 3.05 5 1.52 45 20 145 66

7806 4-Point storage system 8:1 10 3.05 5 1.52 75 34 200 91

7807 2-Point storage system 3:1 10 3.05 5 1.52 15 7 60 27

7808 4-Point SUP storage system 2:1 10 3.05 5 1.52 10 4.5 45 20

WARNING! Strictly follow all instructions to avoid an accident,

damage to property, personal injury, or death. See www.harken.

com/manuals for additional safety information.

WARNING! Do not use this product for human suspension.

Components can fail causing person to fall, possibly resulting

in serious injury or death.

KIT INCLUDES

2 Harken micro pulleys

1 Harken organizer

2 #10 x 2

/2" (6 x 63 mm) screws

1 shackle

1 welded screw eye

1 Harken block and tackle

2 black drop ropes: 1 long, 1 short

1 single hoisting rope

2 webbing straps with buckles 7' (2.13 m)

2 pigtail lag screws

4 lag bolts

" x 4" (8 x 100 mm)

4 washers

PURCHASE SEPARATELY IF NEEDED

1 pine board (riser) (grade 2)

2" x 6" x 7" (50 mm x 152 mm

x 180 mm). Do not use for rafters

running sideways.

TOOLS

Electric/hand drill Safety glasses

Drill bits:

" (4 mm)

" (5.5 mm)

" (8 mm)

Pencil

Stud finder

Stepladder

Tape measure

224 Harken

micro pulleys

237 Harken

organizer

HFS961

#10 x 2

" (6 mm x 63 mm) screws

HCP1452 28'

drop ropes

7754A.Assy

Harken block

and tackle

HCP1443

welded

screw eye

072 Harken

shackle

HCP1483 35'

single hoisting rope

HCP1660.SET

webbing straps with buckles

7' (2.13 m)

HFS987

washers

HFS988

lag bolts

" x 4"

(8 x 100 mm)

HCP1444

pigtail lag screws

Harken, Inc. • N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974 • Tel: 262-691-3320 • Fax: 262-701-5780• Email: hoister@hoister.com • Web: www.hoister.com

1 2

Sommario

Pagina 1 - MAXIMIZE GARAGE SPACE

3-EasySteps3 Store2 LiftIncludes all mounting hardware1 SecurePlan Location of 2-Point Lift System Read instructions before starting. Plan ceiling loc

Pagina 2 - MAINTENANCE

Install Welded Screw Eye Locate welded screw eye (E) in wood top-plate running across top of wall. Distance from welded screw eye (E) to organizer (B)

Commenti su questo manuale

Nessun commento

Harken 7807 2-Point Lift - 60 lb Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Harken 7807 2-Point Lift - 60 lb. Harken 7807 2-Point Lift - 60 lb User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Harken 7807 2-Point Lift - 60 lb