Harken 46.2ST Winche Manuale Utente

Radial Winch 46.2 STInstallation and Maintenance ManualMRW-02

10Radial Winch 46.2 STInstallation and Maintenance ManualCarry out Procedure1 as shown in the paragraph on winch installation and then do the followi

11Radial Winch 46.2 STInstallation and Maintenance Manual12. Remove the gear n°10 and remove the pawls carrier n°7.13. Remove the gear n°315. Slide of

12Radial Winch 46.2 STInstallation and Maintenance ManualIf it is necessary to replace any jaws of the winch, proceed as follows:Once the winch is com

13Radial Winch 46.2 STInstallation and Maintenance ManualExplodedviewwithmaintenanceproducts1.ApplyHarken®greaseonassysocketscrew-2.Appl

14Radial Winch 46.2 STInstallation and Maintenance ManualAssemblyMake sure that the holes and drainage channels in the base of the winch are not obstr

15Radial Winch 46.2 STInstallation and Maintenance ManualHarken®limitedworldwidewarrantyRefer to the Harken® Limited Worldwide Warranty in the Har

16Radial Winch 46.2 STInstallation and Maintenance ManualExploded viewExplodedview302928272226251716181918242321568911414153798101321201212A

17Radial Winch 46.2 STInstallation and Maintenance Manual302928272226251716181918242321568911414153798101321201212A

18Radial Winch 46.2 STInstallation and Maintenance Manual*Servicekitavailable;seewinchkitsectiononthewebsitewww.harken.com**Winchproductst

19Radial Winch 46.2 STInstallation and Maintenance ManualRadialWinch46.2STCC=drum in chromed bronze*Servicekitavailable;seewinchkitsectionon

2Radial Winch 46.2 STInstallation and Maintenance ManualIndexIntroduction 3Technicalcharacteristics 3Weights 3Maximumworkingload 3Outline 3Ins

20Radial Winch 46.2 STInstallation and Maintenance ManualRadialWinch46.2STCWC=drum in chromed bronze - W=components RAL 9003*Servicekitavailable;

3Radial Winch 46.2 STInstallation and Maintenance ManualIntroduction - Technical characteristics - OutlineIntroductionThis manual gives technical info

4Radial Winch 46.2 STInstallation and Maintenance ManualInstallationThe winch must be installed on a at area of the deck, reinforced if necessary to

5Radial Winch 46.2 STInstallation and Maintenance ManualThe winch can be installed following one of the two procedures below (Procedure1 or Procedure

6Radial Winch 46.2 STInstallation and Maintenance ManualProcedure2To install, you must remove the winch skirt and use hexagonal headed bolts.Tools ne

7Radial Winch 46.2 STInstallation and Maintenance ManualNOTICEMake sure the skirt is correctly clipped on to the base of the winch. Install the winch

8Radial Winch 46.2 STInstallation and Maintenance ManualB. Remove the winch and drill the ve 8.2 mm diameter holes.C. Bolt the base of the winch to t

9Radial Winch 46.2 STInstallation and Maintenance ManualNOTICEBefore closing the winch, make sure the holes and drainage channels in the base of the w