Harken 1851 Staysail furling Manuale Utente
Navigare online o scaricare Manuale Utente per Hardware Harken 1851 Staysail furling. Harken 1851 Staysail furling User Manual Manuale Utente
- Pagina / 2
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
I N S T R U C T I O N S H E E T
1851, 1852, 1899 Staysail Furlers
1251 East Wisconsin Avenue • Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320 • Fax: (262) 691-3008
Web: http://www.harken.com • E-mail: [email protected]
Choosing a Staysail Furling System
Maximum LP is determined by amount of line that can be wrapped on drum. If
your luff length is under 50' (15.25 m) but your LP is over 13
1
/2' (4 m), use 1852.
If your luff length is under 80' (24 m) but your LP is over 28' (8.5 m), use 1899.
Sail must be fitted with a special luff wire or rope designed for furling. This wire or rope must
transmit torque of furling unit to head of sail. Your sailmaker may need to shorten sail luff slightly to
accommodate length of drum and swivel. Some sailmakers add Velcro
®
to clew of sail to hold it in a
tight roll during storage.
A Staysail furler makes it easy to set or strike a staysail because sail goes up and down wrapped in
a tight roll. It's easy to test the effectiveness of a staysail in marginal conditions because the crew
can set or remove sail without leaving their normal positions —they simply roll or unroll sail.
A furler makes it easier to jibe. The staysail can be rolled and dropped on deck. After boat is jibed,
the halyard can be cleared and the sail reset.
A Harken staysail furling system is designed to be left attached to sail. Store staysail by “coiling"
loosely before bagging. We suggest sheets and furling lines of different colors to minimize
confusion when setting sail.
Using Harken Staysail Furler
Sail Modifications
Determine Furling Line Length
Use amount shown in chart plus enough line to lead to where crew will be stationed. If you plan to
operate unit from close by add 5' (1.5 m) of line. If you plan to have a crew member furl from the
rail you may need to add 15' (4.5 m) of line or more.
Part
No.
Maximum Luff Length Maximum LP
ft m ft m
1851
50 15.25 13
1
/2 4
1852
70 21.33 20 6
1899
80 24 28 8.5
Part
No.
Line Length (See Below) Line Ø
ft m in mm
1851
10 10 5/32 4
1852
25 7.6 1/4" 6
1899
35 10.7 5/16 8
Strictly follow all instructions to avoid an accident, damage to your vessel, personal
injury or death. See www.harken.com for additional safety information.
I N S T R U C T I O N S H E E T
1851, 1852, 1899 Staysail Furlers
1251 East Wisconsin Avenue • Pewaukee, WI 53072 U.S.A.
Telephone: (262) 691-3320 • Fax: (262) 691-3008
Web: http://www.harken.com • E-mail: [email protected]
Choosing a Staysail Furling System
Maximum LP is determined by amount of line that can be wrapped on drum. If
your luff length is under 50' (15.25 m) but your LP is over 13
1
/2' (4 m), use 1852.
If your luff length is under 80' (24 m) but your LP is over 28' (8.5 m), use 1899.
Sail must be fitted with a special luff wire or rope designed for furling. This wire or rope must
transmit torque of furling unit to head of sail. Your sailmaker may need to shorten sail luff slightly to
accommodate length of drum and swivel. Some sailmakers add Velcro
®
to clew of sail to hold it in a
tight roll during storage.
A Staysail furler makes it easy to set or strike a staysail because sail goes up and down wrapped in
a tight roll. It's easy to test the effectiveness of a staysail in marginal conditions because the crew
can set or remove sail without leaving their normal positions —they simply roll or unroll sail.
A furler makes it easier to jibe. The staysail can be rolled and dropped on deck. After boat is jibed,
the halyard can be cleared and the sail reset.
A Harken staysail furling system is designed to be left attached to sail. Store staysail by “coiling"
loosely before bagging. We suggest sheets and furling lines of different colors to minimize
confusion when setting sail.
Using Harken Staysail Furler
Sail Modifications
Determine Furling Line Length
Use amount shown in chart plus enough line to lead to where crew will be stationed. If you plan to
operate unit from close by add 5' (1.5 m) of line. If you plan to have a crew member furl from the
rail you may need to add 15' (4.5 m) of line or more.
Part
No.
Maximum Luff Length Maximum LP
ft m ft m
1851
50 15.25 13
1
/2 4
1852
70 21.33 20 6
1899
80 24 28 8.5
Part
No.
Line Length (See Below) Line Ø
ft m in mm
1851
10 10 5/32 4
1852
25 7.6 1/4" 6
1899
35 10.7 5/16 8
Strictly follow all instructions to avoid an accident, damage to your vessel, personal
injury or death. See www.harken.com for additional safety information.
1
2
Sommario
Pagina 1
I N S T R U C T I O N S H E E T1851, 1852, 1899 Staysail Furlers1251 East Wisconsin Avenue • Pewaukee, WI 53072 U.S.A. Telephone: (262) 691-3320 • F
Pagina 2
To attach line, pass it through cleat and fairlead into drum and out through hole in drum cap. Tie an overhand knot in line to secure it. “Charge"
Prodotti e manuali riguardandi Hardware Harken 1851 Staysail furling
(16 pagine)
(36 pagine)
(36 pagine)
(36 pagine)
(36 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 1.467 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale